To access SecureGSM™ SP application settings, press [Tools], press (up)/(down) to choose "Settings" and press (enter). Alternatively, you may press the corresponding number on your keypad.
The Settings dialog has the following options which enable you to set your preferences. Press (up)/(down) to navigate to an option setting. Press (left)/(right) to change numerical settings. Press (enter) to change the status of check boxes.
When you are finished adjusting settings, press [OK].
To restore all settings to default values, press [Default]
In call microphone sensitivity.
The sensitivity setting allows manual control over your microphone. The settings made here are reflected in the Advanced Audio Control and vice versa.
Upon installation, the default settings are applied depending on your device.
Note: Having the Sensitivity too high may cause degradation in voice quality and introduce artifacts such as spurious echo due to speaker/microphone feedback. The Sensitivity setting within SecureGSM™ SP is specifically designed to minimize such issues.
Please refer to Reducing Echo for information on how to optimise your settings.
In call speaker volume.
This setting allows you to set the optimal level of the speaker volume during a SecureGSM™ SP call with much higher precision than the standard volume control slider. This setting is applied during a SecureGSM™ SP call only and does not affect other applications while SecureGSM™ SP is in idle (Ready... ) state.
The settings made here are reflected in the Advanced Audio Control and vice versa.
Upon installation, the default settings are applied depending on your device.
Please refer to Reducing Echo for information on how to optimise your settings.
Use Contacts application.
This setting allows you to enable dialing from your Contacts manager. This setting is off by default. Press (enter) to enable. To learn how to use this feature, please see the Dialing from Contacts item under the Program Operation Heading.
Note: Using this feature may allow records of your calls to be stored in the operating system's logs. For optimum security, we recommend leaving this feature off.
Launch program on system startup.
This setting allows you to enable automatic startup of the SecureGSM™ SP application. This will ensure that you do not miss any SecureGSM™ SP calls after a Power Cycle of your device.
This setting is disabled by default. Press (enter) to enable.
We recommend this feature be enabled for convenience.
Home Screen Plug-in
This setting enables the Home screen Program Status Indicator.
This setting is disabled by default. Press (enter) to enable.
We recommend this feature be enabled for convenience.
When you are finished adjusting settings, press [OK].